Comparing ISDN configuration with HP MSR with Cisco configuration
HP MSR Router configuration
MSR201X_5.20.R2315 is the working IOS for HP MSR20-11 routers this ios is 5 month old ios
latest is R2317, Having the ISDN debugs in IOS .
sysname cb0659
#
interface Dialer2
link-protocol ppp
ppp authentication-mode chap
ppp chap user cb0659 ------------Should
be same as in cisco devices (dialer
remote-name cb0659)
ppp chap password simple cisco
ip address 172.16.13.149
255.255.255.252
dialer enable-circular
dialer-group 1
dialer route ip 172.16.13.150
user cb0659 broadcast 0899999: ----Remote ip address and user name should right (user name should match with cisco dialer
remote-name cb0659) . Required to
broadcast the user.
#
interface Bri1/0
description ### Connected to anoopp3com@gmail.com Name ###
link-protocol ppp
ppp authentication-mode chap
dialer enable-circular
dialer-group 1
dialer circular-group 2
Dialer-rule 2 ip permit (Permitting isdn traffic)
Note: There no relation with user create local in HP device.No need to create the
Local-user cb0659
password simple XXXX
service-type ppp
dialer circular-group 2 = interface Dialer2
Note: There no relation with user create local in HP device.No need to create the
Local-user cb0659
password simple XXXX
service-type ppp
dialer circular-group 2 = interface Dialer2
Cisco configuration for ISDN
Username cb0659 password cisco123
interface
Dialer37
description XXXXXXX
ip
address 172.16.13.150 255.255.255.252
no
ip redirects
no
ip unreachables
no
ip proxy-arp
encapsulation
ppp
dialer
pool 1
dialer
remote-name cb0659--------Should be same in HP dialer 2(ppp chap user cb0659)
dialer
idle-timeout 180
dialer
caller 0000000
dialer-group
1
no
cdp enable
ppp
authentication chap
end
ISDN-PROTOCOL <type> dss1
isdn switch-type basic-net3 = to =dss1(default in HP msr routers)
Some commands for isdn
[0704]dis isdn active-channel
Bri1/0
No active call
[0704]
[0704]dis isdn call-info
Bri1/0(User-side) : DEACTIVE (this not good L3 connection is not activated)
Link Layer 1: TEI = NONE, State = TEI_UNASSIGNED
Link Layer 2: TEI = NONE, State = TEI_UNASSIGNED
Link Layer 3: TEI = NONE, State = TEI_UNASSIGNED
Link Layer 4: TEI = NONE, State = TEI_UNASSIGNED
Link Layer 5: TEI = NONE, State = TEI_UNASSIGNED
Link Layer 6: TEI = NONE, State = TEI_UNASSIGNED
Link Layer 7: TEI = NONE, State = TEI_UNASSIGNED
Link Layer 8: TEI = NONE, State = TEI_UNASSIGNED
Network Layer: 0 connection(s)
[704]
[704]dis isdn call-info interface Bri 1/0
Bri1/0(User-side) : DEACTIVE
Link Layer 1: TEI = NONE, State = TEI_UNASSIGNED
Link Layer 2: TEI = NONE, State = TEI_UNASSIGNED
Link Layer 3: TEI = NONE, State = TEI_UNASSIGNED
Link Layer 4: TEI = NONE, State = TEI_UNASSIGNED
Link Layer 5: TEI = NONE, State = TEI_UNASSIGNED
Link Layer 6: TEI = NONE, State = TEI_UNASSIGNED
Link Layer 7: TEI = NONE, State = TEI_UNASSIGNED
Link Layer 8: TEI = NONE, State = TEI_UNASSIGNED
Network Layer: 0 connection(s)
[cb0]
[cb0]dis isdn call-record interface Bri 1/0 (equal to cisco show isdn call-history)
Bri1/0
-------------------------------------------------------------------------------
Call Calling Called Start Stop Seconds
Type Number Number Time Time Used
-------------------------------------------------------------------------------
No call record
