Interface Range command in HP

HP commands

<slave1>sys

[slave1]#vlan 122

[slave1]#port GigabitEthernet3/0/10 to GigabitEthernet3/0/25

[slave1]#save

All the ports will be assign Vlan 122 .it is not equal to port range command in Cisco devices  

 Cisco commands

Switch(config)#interface range fastethernet0/1 – 20
Switch(config-if-range)#speed 100
Switch(config-if-range)#duplex full

Router(config)# interface range fastethernet5/1.1 - fastethernet5/1.4

Router(config-if)# encapsulation dot1Q 301

Router(config-if)# no shutdown

Router(config-if)#