ELF file is 32 bit
Consoles: U-Boot console
FreeBSD/arm U-Boot loader, Revision 1.1
(builder@dagmath.juniper.net, Tue Jul 26 01:25:53 UTC 2011)
Memory: 512MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0s2:
Loading /boot/defaults/loader.conf
/kernel data=0x87e6c0+0xdde4c syms=[0x4+0xf04b0+0x4+0xc7bce]
Hit [Enter] to boot immediately, or space bar for command prompt.
HOLD the space bar when booting up the Juniper ex2200
Type '?' for a list of commands, 'help' for more detailed help.
loader>
loader>
loader>
loader>
loader> boot -s
Kernel entry at 0x1400100 ...
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1996-2013, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 12.3R4.6 #0: 2013-09-13 02:38:59 UTC
builder@kessuth.juniper.net:/volume/build/junos/12.3/release/12.3R4.6/obj-ar
m/junos/bsd/kernels/JUNIPER-EX-2200/kernel
can't re-use a leaf (all_slot_serialid)!
CPU: Feroceon 88FR131 rev 1 (Marvell core)
cpu53: Feroceon 88FR131 revision WB enabled EABT branch prediction enabled
16KB/32B 4-way Instruction cache
16KB/32B 4-way write-back-locking-C Data cache
real memory = 536870912 (512 MB)
avail memory = 503255040 (479 MB)
SOC: Marvell 88F6281 rev A0, TClock 200MHz
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA256
MAC/veriexec fingerprint module loaded: SHA1
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES properties ...
mbus0: <Marvell Internal Bus (Mbus)> on motherboard
ic0: <Marvell Integrated Interrupt Controller> at mem 0xf1020200-0xf102023b on m
bus0
timer0: <Marvell CPU Timer> at mem 0xf1020300-0xf102032f irq 1 on mbus0
gpio0: <Marvell Integrated GPIO Controller> at mem 0xf1010100-0xf101011f irq 35,
36,37,38,39,40,41 on mbus0
uart0: <16550 or compatible> at mem 0xf1012000-0xf101201f irq 33 on mbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at mem 0xf1012100-0xf101211f irq 34 on mbus0
ehci0: <88F5XXX Integrated USB 2.0 controller> at mem 0xf1050000-0xf1050fff irq
48,19 on mbus0
usb0: EHCI version 1.0
usb0 on ehci0
usb0: USB revision 2.0
uhub0: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/90.15, addr 2
uhub1: single transaction translator
uhub1: 2 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 3
mge0: <Marvell Gigabit Ethernet controller> at mem 0xf1072000-0xf1073fff irq 12,
13,14,11,46 on mbus0
mge0: hardware MAC address 84:b5:9c:83:24:3f
miibus0: <MII bus> on mge0
e1000phy0: <Marvell 88E1118 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
i2c0: <Marvell I2C ARM OnChip Controller> at mem 0xf1011000-0xf101101f irq 29 on
mbus0
syspld0: <SYSPLD> on i2c0
8564 rtc0: <8564 RTC> on i2c0
poe0: <POE> on i2c0
poe_attach: re-types method failed
device_attach: poe0 attach returned 19
cfi0: <SPI flash - 8MB> at mem 0xf1010600-0xf101062f,0xf8000000-0xf87fffff irq 2
3 on mbus0
mpfe0: <Juniper EX-series Packet Forwarding Engine> at mem 0xf4000000-0xf7ffffff
irq 113 on mbus0
pcib0: <Marvell 88F6281 PCI-Express host controller> at mem 0xf1040000-0xf1041ff
f,0xe8000000-0xefffffff irq 9 on mbus0
pci0: <PCI bus> on pcib0
Initializing product: 75 ..
bmeb: bmeb_lib_init done 0xc337e800, addr 0xc1d564bc
bme0:Virtual BME driver initializing
Timecounter "CPU Timer" frequency 200000000 Hz quality 1000
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Kernel thread "wkupdaemon" (pid 42) exited prematurely.
Trying to mount root from ufs:/dev/da0s2a
Invalid time in real time clock.
Check and reset the date immediately!
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
System watchdog timer disabled
Enter full pathname of shell or 'recovery' for root password recovery or RETURN
for /bin/sh: recovery
After this command (recovery) you will be prompt for root>
END..................................
Consoles: U-Boot console
FreeBSD/arm U-Boot loader, Revision 1.1
(builder@dagmath.juniper.net, Tue Jul 26 01:25:53 UTC 2011)
Memory: 512MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0s2:
Loading /boot/defaults/loader.conf
/kernel data=0x87e6c0+0xdde4c syms=[0x4+0xf04b0+0x4+0xc7bce]
Hit [Enter] to boot immediately, or space bar for command prompt.
HOLD the space bar when booting up the Juniper ex2200
Type '?' for a list of commands, 'help' for more detailed help.
loader>
loader>
loader>
loader>
loader> boot -s
Kernel entry at 0x1400100 ...
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1996-2013, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 12.3R4.6 #0: 2013-09-13 02:38:59 UTC
builder@kessuth.juniper.net:/volume/build/junos/12.3/release/12.3R4.6/obj-ar
m/junos/bsd/kernels/JUNIPER-EX-2200/kernel
can't re-use a leaf (all_slot_serialid)!
CPU: Feroceon 88FR131 rev 1 (Marvell core)
cpu53: Feroceon 88FR131 revision WB enabled EABT branch prediction enabled
16KB/32B 4-way Instruction cache
16KB/32B 4-way write-back-locking-C Data cache
real memory = 536870912 (512 MB)
avail memory = 503255040 (479 MB)
SOC: Marvell 88F6281 rev A0, TClock 200MHz
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA256
MAC/veriexec fingerprint module loaded: SHA1
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES properties ...
mbus0: <Marvell Internal Bus (Mbus)> on motherboard
ic0: <Marvell Integrated Interrupt Controller> at mem 0xf1020200-0xf102023b on m
bus0
timer0: <Marvell CPU Timer> at mem 0xf1020300-0xf102032f irq 1 on mbus0
gpio0: <Marvell Integrated GPIO Controller> at mem 0xf1010100-0xf101011f irq 35,
36,37,38,39,40,41 on mbus0
uart0: <16550 or compatible> at mem 0xf1012000-0xf101201f irq 33 on mbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at mem 0xf1012100-0xf101211f irq 34 on mbus0
ehci0: <88F5XXX Integrated USB 2.0 controller> at mem 0xf1050000-0xf1050fff irq
48,19 on mbus0
usb0: EHCI version 1.0
usb0 on ehci0
usb0: USB revision 2.0
uhub0: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/90.15, addr 2
uhub1: single transaction translator
uhub1: 2 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 3
mge0: <Marvell Gigabit Ethernet controller> at mem 0xf1072000-0xf1073fff irq 12,
13,14,11,46 on mbus0
mge0: hardware MAC address 84:b5:9c:83:24:3f
miibus0: <MII bus> on mge0
e1000phy0: <Marvell 88E1118 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
i2c0: <Marvell I2C ARM OnChip Controller> at mem 0xf1011000-0xf101101f irq 29 on
mbus0
syspld0: <SYSPLD> on i2c0
8564 rtc0: <8564 RTC> on i2c0
poe0: <POE> on i2c0
poe_attach: re-types method failed
device_attach: poe0 attach returned 19
cfi0: <SPI flash - 8MB> at mem 0xf1010600-0xf101062f,0xf8000000-0xf87fffff irq 2
3 on mbus0
mpfe0: <Juniper EX-series Packet Forwarding Engine> at mem 0xf4000000-0xf7ffffff
irq 113 on mbus0
pcib0: <Marvell 88F6281 PCI-Express host controller> at mem 0xf1040000-0xf1041ff
f,0xe8000000-0xefffffff irq 9 on mbus0
pci0: <PCI bus> on pcib0
Initializing product: 75 ..
bmeb: bmeb_lib_init done 0xc337e800, addr 0xc1d564bc
bme0:Virtual BME driver initializing
Timecounter "CPU Timer" frequency 200000000 Hz quality 1000
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Kernel thread "wkupdaemon" (pid 42) exited prematurely.
Trying to mount root from ufs:/dev/da0s2a
Invalid time in real time clock.
Check and reset the date immediately!
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
System watchdog timer disabled
Enter full pathname of shell or 'recovery' for root password recovery or RETURN
for /bin/sh: recovery
After this command (recovery) you will be prompt for root>
END..................................
No comments:
Post a Comment