HP is having comware v5 based controller and MSM based controller, Basic difference is MSR controller are Pure HP basic system(GUI basic) and comware controller are 3com devices like 810 series (CLI)
(BYOD setup are mostly working in comware suite)
MSM Home page
Controller > Network > Interfaces
By default devices will have 2 internet port and 4 Lan ports
Internet (Outside)
<<<<Wireless controller >>>>(inside port) LAN port
Management > Network discovery > By default it will
only enable for Lan ports in this case Access Network port (LAN port). We need
to client on internet network for enabling auto
discovery of Access point. Otherwise it won’t able to find the AP’s in network
Once the access point are activated. We can find it on
Controlled AP’s section.
Note :- MSM controller are based on centralized architecture
and all the wireless traffic wil go thought controller
Controller port we can see on Network >Ports >
VSC is screen, We can setup what kind of authentication like
Open ,WEP, WAP , Radius server OR WAP2
Controller >> VSC > Virtual AP >(Default
virtual AP will not enable for SSID, We need click it for Broadcasting the SSID
VSC >Radius Authentication
VSC>
Default we should not change this option (Wireless Mobility is licensed one for L2/L3 roaming)
Block User: - will block user which is misconfigured or
unwanted users which is not authorized (It will drop user traffic in AP it self
Consider the user at Home :- if you click this option user
traffic will allowed to network ap will allow the traffic via default Vlan
which is configured on Controller
Also ways configure
BLOCK USER option
VSC’s Network tree (it will show total controllers and controlled
Access points)
In this screen you
see the VSC setup Parameters (SSID’s)
VSC Profile we can see the Total SSID group which is configured
in Controller with authentication parameter
No comments:
Post a Comment