Monday, June 10, 2013

MSR 2010 Configure static routing + PPPOE Internet

#
Version 5.20, Release 1719
#
sysname H3C
#
??domain Default enable system
#
enable DNS proxy
DNS Server 202.103.44.150
DNS Server 202.103.0.117
#
acl number 2000
rule 0 permit 192.168.1.0 0.0.0.255 Source
deny rule 1
#
vlan 1
#
domain system
authentication ppp local
Access-limit disable
State Active
idle-cut disable
self-service-url disable
IP pool 1 192.168.1.2 192.168.1.250
#
dhcp-pool 0 Server IP
Network 192.168.10.0 mask 255.255.255.0
192.168.10.254 Gateway-List
List 202.103.44.150 DNS-
domain-name fgj
expired Day 10 hour 12
#
user-group system
#
local-user A101
Password simple six hundred and twenty-nine thousand four hundred and seventy-six
#
interface AUX0
async mode Flow
link-protocol ppp
#
interface Ethernet0 / 0
Port link-mode route
Description LAN
NAT outbound
NAT outbound 2000
PPPoE-Server bind Virtual-Template 1
IP address 58.51.60.88 255.255.255.128
#
interface Virtual-Template1
ppp authentication-mode pap
ppp chap user e111
ppp ipcp remote-address Forced
ppp ipcp DNS 202.103.44.150 202.103.0.117
remote address pool 1
IP address 192.168.1.1 255.255.255.0
#
interface Virtual-Ethernet
#
interface NULL0
#
interface Vlan-interface 1
PPPoE-Server bind Virtual-Template 1
#
interface Ethernet0 / 1
Port link-mode Bridge
#
interface Ethernet0 / 2
Port link Bridge-mode
#
interface Ethernet0 / 3
Port link-mode Bridge
#
interface Ethernet0 / 4
Port link-mode Bridge
#
IP route-static 0.0.0.0 0.0.0.0 58.51.60.1
#
dhcp enable
#
NMS primary Monitor-interface Ethernet0 / 0
#
user-interface aux 0
user-interface vty 0 4
#
return

int vlan 1
IP address 192.168.10.254 24
#

No comments:

Post a Comment

Optimization of fortigate IPS

IPS signature need select according to infrastructure environment  Eg:-  if  we are not have Linux servers this ips signature can disable (d...