How to recovery the password in IPS module ? IPS Password breaking in H3C devices

 How to recovery the password for H3C IPS module ?

BootWare Menu
SecBlade card is powered on, the card first performs system initialization. After system initialization, the
following information is displayed on the configuration terminal:
System start booting...
Booting Normal Extend BootWare....
********************************************************
* *
* SecBlade BootWare, Version 1.12 *
* *
********************************************************
Copyright (c) 2004-2007 Hangzhou H3C Technologies Co., Ltd.
Compiled Date : Jul 27 2007
CPU Type : XLR732
CPU L1 Cache : 32KB
CPU Clock Speed: 1000MHz
Memory Type : DDR2 SDRAM
Memory Size : 1024MB
Memory Speed : 533MHz
BootWare Size : 1024KB
Flash Size : 4MB
cfa0 : 244MB
CPLD Version : 135.0
PCB Version : Ver.A
3-6
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Press Ctrl+B to enter the extended boot menu. Otherwise, the SecBlade card will enter the application
file decompression process.
Step 1 You must press Ctrl+B in four seconds after “Press Ctrl+B to enter extended boot menu” appears.
Otherwise, the SecBlade card will enter the application file decompression process.
Step 2 Please input BootWare password:
You are required to enter the BootWare password. (Note: The initial BootWare password is null. You
have three attempts to enter the correct BootWare password. A fourth attempt will make the card halt
and you need to restart the card to enter the correct password.) After you type the correct BootWare
password, the current operating device and the main menu are displayed.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.

==================<EXTEND-BootWare MENU>=====================
| <1> Boot System |
| <2> Enter Serial SubMenu |
| <3> Enter Ethernet SubMenu |
| <4> File Control |
| <5> Modify BootWare Password |
| <6> Skip Current System Configuration |
| <7> BootWare Operation Menu |
| <8> Clear Super Password |

(Clear the super user password. The super user password is required in user level switching. By default, no
super user password is set. The setting is valid only for the first reboot of the SecBlade card and
the super user password will be restored next time the SecBlade card reboots.)

| <9> Storage Device Operation |
| <0> Reboot |
=============================================================
Enter your choice(0-9):8